stress range

The interfacial failure due to thermal stress will increase with increasing the range of temperature and the number of cycles.

随着冷热循环温度区间温差的增大、冷端温度的降低、循环次数的增多，形成的热应力对材料的界面损伤越严重；

This paper summarize the permissible stress range method for fatigue strength analysis which was adopted in guidance of China Classification Society ( CCS).

文章总结了中国船级社疲劳强度评估方法中的许用应力范围方法。

According to the experimental results of steel compact tension specimen, a empirical relationship between AE energy rate and stress intensity factor range was formulated at the stage of stable crack growth.

通过试验，得出了紧凑拉伸试样在裂纹稳定扩展阶段声发射信号能量率与应力强度因子幅值之间的关系式。

The PWS increases with the increasing of power and pulse. But in the case of identical PWS, the range of influence of thermal stress by long pulse is larger than that by high power.

在增加功率和脉冲时间的条件下，激光锤引起的焊后偏移量也相应的增加，但是在校正量相同的情况下，增加脉冲时间比增加功率对材料的热应力影响区要大。

More than 300 smooth and notched specimens of 40 Cr alloy steel undergoing two kinds of heat treatments were used to study the effect of stress triaxiality and temperature on macro-mechanical behaviour and micro-fracture mechanism during the ductile-brittle transition in a range of temperature from 20 ℃ to-196 ℃.

研究了300余件40Cr钢轧制态和调质态试样在20℃至&196℃范围内温度与应力对该材料的韧脆转变力学行为和微观断裂机制的影响。

Stress evaluating to the slant conical shell according to the finite element calculation result. It is said that the stresses are within the allowable range.

根据有限元结果对偏心锥壳部位进行应力评定，各项应力均在允许范围内。

The stress range histogram was used to estimate the effective root-mean-square stress range.

应力范围直方图可用作估算等效 均方根 应用力范围.

Themaxium range of allowable stress under different reliability is given.

文中还给出了对应于不同可靠度下的最大容许应力幅值.

Discussion on the Increased Range of Allowable Stress in the Design Code for Industrial Metallic Piping

对工业金属管道设计规范中许用应力提高幅度的探讨

The calculation of stress around the opening of a dam by the program indicates that the quadratic boundary element method has a wide range of applications with high precision.

计算实践表明：二次边界元法有广阔的应用范围及较高的计算精度，且计算准备工作简单，方便易行，程序可在水电工程中推广使用。

Objective To study the range and change of stress in normal radiocarpal joint.

目的研究正常桡腕关节内应力分布及其变化规律。